All Projects

Welcome to the Quadronyx Bug Tracker.

You can select a project from the “All Projects” drop down combo box in the top right corner. Displayed below are the tasks for ALL Quadronyx projects.

IDProject  ascCategoryTask TypeSeveritySummaryStatusProgressLast Edited
7QELServS.AIBug ReportLowCreature AI is almost worse than noneNew
0%
2010-01-22 Task Description

Creatures move in a very stupid way and inevitably end up stuck and/or blocking paths etc. Whilst paths will be fixed in maps by making them wider, creatures should probably not stop on any narrow area anyway and should, in general, “think” about where they’re going :-P

63QELServServerPlanned FeatureLowChannels ACLNew
0%
2010-01-28 Task Description

Channels should have support for simple ACL. They can have a “list” that will function as either a blacklist OR a whitelist.

  • First person to join get’s “op” status.
  • The channel has a BLANK list, defined as a BLACKLIST.
  • op can at any time add a name to the BLACKLIST. By doing so, that person cannot join the channel.
  • If the list is empty, op can add a name as a WHITELIST entry, thereby making the list a WHITELIST. From that moment on, ONLY whitelists are allowed to join and anyone (other than op) that is currently in the channel will be removed.
  • List can only be changed from WHITE to BLACK when it’s empty.
  • op can at any point change someone else to op. They swap effective positions so if the new op was on the WHITELIST then the old op is added and the new op removed (op doesn’t need to be WHITE).

Undecided behaviour:

In the event that the op leaves, one of these should happen:

  • the (WHITE/BLACK)LIST is cleared.
  • if WHITELIST, the first person in WHITELIST becomes op, otherwise list is cleared.
48QELServServerBug ReportLowBags should be stackableAssigned
0%
2010-01-20 Task Description

Despite the changes for  FS#47  the CLIENT doesn’t sent the right number of items to pick up as it expects items in bags to be stacked.

Since stacking in the bag is reasonable, and because it’ll save a client modification at this stage, bags should be made to support stacking of non-stackable items.

62QELServServerBug ReportLowAnimations as a result of movement clicks during pendin...Assigned
0%
2010-01-26 Task Description

If whilst in pending combat state (i.e. you just clicked to attack a player/creature from a few steps away and start moving towards them, but combat hasn’t actually started yet) you click to move elsewhere, just after the combat animations start you then do a ‘step or two’ of the move animation in the direction you clicked, then flick back to combat animations fighting your opponent.

It looks weird and can mess up the rotation of the combat participants.

60QELServS.AdminPlanned FeatureLowAdmin access player storageNew
0%
2010-01-22 Task Description

Admins need the ability to see (and modify) a player’s storage. This would allow them to remove items, add items etc. They would most likely have to use a bag as a go between but that would be acceptable.

59QELServS.AdminPlanned FeatureLowAdmin access player inventoryNew
0%
2010-01-22 Task Description

Admins need the ability to see (and modify) a player’s inventory. This would allow them to remove items, add items etc. They would most likely have to use a bag as a go between but that would be acceptable.

11QELServS.TradingPlanned FeatureLowAdd support for storage tradingNew
0%
2009-09-21 Task Description

Trading should support transferring items to/from storage as well as inventory.

54QELServS.AdminPlanned FeatureHighAdd support for banningNew
0%
2010-01-22 Task Description

As we get players, we will get trouble makers, that much is already clear. We need the ability to ban users for a configurable amount of time, as well as preset amounts. These SHOULDN’T effect the forum bans however a ban on the forum SHOULD be a ban in game also (I think).

Something like this might do:

#ban PLAYERNAME [[[Y:]D:]H:]M REASON

eg.

#ban testuser 1:4:6:3 Because you're a tool

This would ban ‘testuser’ for 1 year, 4 days, 6 hours and 3 minutes because he’s a tool. He would be informed of such when trying to login.

Other examples:

#ban testuser 5 Come back in 5 minutes when you've learned to behave
#ban testuser 7:0 You're gone for 1 week buddy!

Should we support banning per player or per forum account (given that 1 forum account can have multiple players)?

Should we have pre-sets like: #ban7 for 7 days, #banwarn for 1 hour, #banladen for life?

56QELServServerPlanned FeatureLowAdd player list command for playersNew
0%
2010-01-22 Task Description

It’d be good for players to be able to get a list of who’s online. Perhaps if we require a PATTERN when more than say 20 are on, that would hopefully stop too many people abusing it.

Perhaps the easiest way would be to stop once you get to 20. So:

#online

Would list ALL the players if there were ⇐ 20 online at that point, however if there were thousands, it’d only return the first 20 (in order of Actor ID I guess).

58QELServServerPlanned FeatureLowAdd lastseen abilityNew
0%
2010-01-22 Task Description

Add the ability to see when the last time a player was on. This would be a useful feature for players I would think.

50QELServServerFeature RequestMediumAdd ability for equipment to become "degraded"New
0%
2010-01-22 Task Description

Equipment should support being degraded. At the moment we have break percentages but once these kick in the item is simply lost. We should support the item transitioning to another state, optionally allowing for a modification of it’s stats.

19QELServServerBug ReportLowActors should have a limited sight rangeAssigned
40%
2010-01-09 Task Description

At the moment, all actors can see all other actors on the map they are on. Instead they should have a limited range of vision.

4QELServS.CombatBug ReportLowA successful flee during combat prep doesn't fleeNew
0%
2009-09-21 Task Description

( from: http://qelserv.quadronyx.org/forums/index.php?topic=15.msg318#msg318 )

If you attempt to flee during combat preparation and actually succeed, the battle still takes place.

119RatSlapUncategorisedBug ReportLowUnrecognised keys/buttons fail silentlyNew
0%
2018-08-06 Task Description

QB#118 shows that unrecognised parameters (such as “button5”) fail silently,
assigning 000000h instead of reporting an error.

107RatSlapUncategorisedPlanned FeatureHighReset to defaults/factory reset optionAssigned
0%
2018-07-102 Task Description

At present, the original configuration is lost once you modify the modes of the
mouse. An option to return the mouse to it’s factory defaults would be
advantageous.

116RatSlapUncategorisedPlanned FeatureMediumModes should have simpler names such as A, B, CNew
0%
2018-08-06 Task Description

The mode names should be simpler than “F3”, “F4” and “F5”. They were only named
this way as that was the hex code for the mode, hardly user friendly.

125RatSlapUncategorisedBug ReportMediumError assigning Num+New
0%
2018-08-06 Task Description

From GitHub Issue #16 by vdomos :

  Hi,
  
  I have this error when assign a button to LeftCtrl+Num+ (zoom+ in FIrefox),
  LeftCtrl+Num- is ok.
  
      $ ./ratslap --modify F3 --G7 LeftCtrl+Num+ --G6 LeftCtrl+Num- --print F3 --select F3                  
      RatSlap v0.2.2-tags/0.2.2^0 (BUILT: 2018-07-11 11:06:16+0200)
      Copyright (C) 2016 Todd Harbour
      Linux configuration tool for Logitech mice (currently only G300/G300S)
      https://gitlab.com/krayon/ratslap/
      Found Logitech G300s (046d:c246) @ 0x5568a0d53ce0
      Detaching kernel driver...
      Modifying Mode: F3
          Setting button 7: LeftCtrl+Num+
      20180712T132246+0200 [E]           main.c:01101:set_mode_button ERROR: Invalid modifier (Num) specified: LeftCtrl+Num+
          Setting button 6: LeftCtrl+Num-
      Saving Mode: F3
      Printing Mode: F3
        Colour:              cyan
        Report Rate:          500
        DPI #1:               500
        DPI #2:        (DEF) 1000
        DPI #3:              1500
        DPI #4:              2500
        DPI Shift:           NOT SET
        Left Click (But1):   Button1
        Right Click (But2):  Button2
        Middle Click (But3): Button3
        G4:                  Button6
        G5:                  Button7
        G6:                  LeftCtrl + Num-
        G7:                  Button9
        G8:                  LeftCtrl + Tab
        G9:                  LeftCtrl + LeftShift + Tab
      Mode Selection Specified: F3
      Selecting Mode: F3
      Attaching kernel driver...
110RatSlapUncategorisedBug ReportLowDocument basic usageAssigned
70%
2016-11-081 Task Description

From https://github.com/krayon/ratslap/issues/2 :

https://github.com/jpotier wrote:

  I may be tired, but I don't get how to set say key 1 to my button G4.
  Actually, apart from calling
      ./ratslap -p f3-5
  I don't understand how you actually set a modified mode. Should I edit the
  source code and recompile?

https://github.com/thomasluquet wrote:

  Same thing, for me, the documentation it is not really clear for me...
  BTW, i try to make a draw of the mouse and the buttons, is it ok ? (i can
  send you the .odg if you want)
112RatSlapUncategorisedPlanned FeatureLowDistribution package should contain archNew
0%
2018-08-06 Task Description

The built dist package is named “ratslap-0.2.0.tar.gz” regardless of architecture.

113RatSlapUncategorisedPlanned FeatureLowConfigure DPI #[1-4], DPI Default and DPI Shift valuesNew
0%
2016-11-09 Task Description

The Logitech G300s allows for 4 different DPI preset values that can be cycled
between using the assignments DPIDown, DPIUp and DPICycle.

Additionally, one of the 4 can be assigned as the DEFAULT DPI.

Lastly, a DPI Shift value can be assigned that can be temporarily switched
to be holding down the DPIShift assignment.

We need the ability to set these.

118RatSlapUncategorisedBug ReportLowButton5 cannot be assigned to G5New
0%
2018-08-062 Task Description

From GitHub Issue #9 by adrfantini:

I have a very weird behaviour here. After having modified many buttons to
suit my needs, I have the following problem.

I cannot assign many software mouse Buttons to many hardware buttons.
Assigning keys seems to always work tho.

Say I am in this situation:
...
  sudo ratslap --p F3
  Left Click (But1):   Button1
  Right Click (But2):  Button2
  Middle Click (But3): Button3
  G4:                  
  G5:                  
  G6:                  
  G7:                  
  G8:                  ModeSwitch
  G9:                  DPICycle
...
Now let's try to modify it with:
  sudo ratslap --modify F3 --G4 Button4
Result:
  sudo ratslap --p F3
  Left Click (But1):   Button1
  Right Click (But2):  Button2
  Middle Click (But3): Button3
  G4:                  
  G5:                  
  G6:                  
  G7:                  
  G8:                  ModeSwitch
  G9:                  DPICycle
Nothing! Let's try assigning keys instead:
  sudo ratslap --modify F3 --G4 LeftAlt+K
  Left Click (But1):   Button1
  Right Click (But2):  Button2
  Middle Click (But3): Button3
  G4:                  LeftAlt + K
  G5:                  
  G6:                  
  G7:                  
  G8:                  ModeSwitch
  G9:                  DPICycle
Works...

In short, I can seem to bind mouse Buttons anymore!

However, some, like sudo ratslap --modify F3 --G7 Button9 work, while others,
like sudo ratslap --modify F3 --G7 Button5 do not.
115RatSlapUncategorisedPlanned FeatureLowAbility to save/load profilesNew
0%
2018-08-06 Task Description

Would be nice to be able to save and load profiles.

Showing tasks 51 - 72 of 72 Page 2 of 2 - 1 - 2

Available keyboard shortcuts

Tasklist

Task Details

Task Editing