All Projects

Welcome to the Quadronyx Bug Tracker.

You can select a project from the “All Projects” drop down combo box in the top right corner. Displayed below are the tasks for ALL Quadronyx projects.

IDProject  ascCategoryTask TypeSeveritySummaryStatusProgressLast Edited
31QELServServerPlanned FeatureLowFinish channel systemNew
0%
2009-12-19 Task Description

The channel system needs to be checked to confirm everything is working properly (active channel might not be working correctly for example).

27QELServServerBug ReportLowEquipping a stackable item, equips ALL of that itemNew
0%
2010-01-181 Task Description

When equipping an item that is stackable (and you have more than one), it equips ALL of that item, not just one.

25QELServServerBug ReportLowTaking multiple non-stackable items from bag screws pla...New
0%
2009-10-30 Task Description

If a player takes multiple of a non-stackable item, in one go, from a bag where they are stacked, their carry capacity gets screwed. ATM this is only causing an issue with #airdrop but could potentially cause other issues if we choose to allow bags to be non-stack exempt.

20QELServS.CombatBug ReportMediumTarget leaves PK causes server lagAssigned
0%
2010-01-091 Task Description

If you attack someone in a PK area, and whilst in the PENDING fight state they leave the PK area, server lag occurs as the server tries to initiate combat.

19QELServServerBug ReportLowActors should have a limited sight rangeAssigned
40%
2010-01-09 Task Description

At the moment, all actors can see all other actors on the map they are on. Instead they should have a limited range of vision.

17QELServServerPlanned FeatureVery LowEquipment swapNew
0%
2009-09-24 Task Description

Dropping an inventory item on to an equipped item, should swap with that item. Undecided as to whether it should swap with what you drop it on, or the equipment of the same type you have equipped (ie if you drop a sword onto a shield, should the new sword swap for the shield or your existing equipped weapon).

11QELServS.TradingPlanned FeatureLowAdd support for storage tradingNew
0%
2009-09-21 Task Description

Trading should support transferring items to/from storage as well as inventory.

9QELServS.TradingPlanned FeatureLowTrading systemAssigned
60%
2010-02-021 Task Description

Implement a trading system allowing players, NPCs and Creatures to trade items (client has existing trading window).

8QELServClientBug ReportLowRemove "stupid" client codeNew
0%
2009-09-24 Task Description

At some point the client should be “cleaned” of all the truly ridiculous RAW_TEXT scraping code and changed to support simple server messages. These will eventually interfere with “normal” functionality.

7QELServS.AIBug ReportLowCreature AI is almost worse than noneNew
0%
2010-01-22 Task Description

Creatures move in a very stupid way and inevitably end up stuck and/or blocking paths etc. Whilst paths will be fixed in maps by making them wider, creatures should probably not stop on any narrow area anyway and should, in general, “think” about where they’re going :-P

4QELServS.CombatBug ReportLowA successful flee during combat prep doesn't fleeNew
0%
2009-09-21 Task Description

( from: http://qelserv.quadronyx.org/forums/index.php?topic=15.msg318#msg318 )

If you attempt to flee during combat preparation and actually succeed, the battle still takes place.

3QELServServerBug ReportLowWalking doesn't navigate NPCs/creatures/playersAssigned
0%
2010-01-091 Task Description

( from: http://qelserv.quadronyx.org/forums/?topic=15.msg238#msg238 )

Quote from: collardhills on 2008-11-13, 02:50:29

It seems if you click somewhere, and someone/thing is next to you, or gets in your way (even in an open map) you just stop, until the thing moves. On main server, you move around the object/person whenever this happens. Could you implement the same thing here?

This is indeed the case as no actor checking occurs while navigating at this point.  At least not until it finds an actor in the next square in sequence.

1QELServUncategorisedPlanned FeatureVery LowMake QELServ BESTEST EVER!111New
0%
2009-09-203 Task Description

QELServ needs to be the BEST ... just BEST ... ever!

125RatSlapUncategorisedBug ReportMediumError assigning Num+New
0%
2018-08-06 Task Description

From GitHub Issue #16 by vdomos :

  Hi,
  
  I have this error when assign a button to LeftCtrl+Num+ (zoom+ in FIrefox),
  LeftCtrl+Num- is ok.
  
      $ ./ratslap --modify F3 --G7 LeftCtrl+Num+ --G6 LeftCtrl+Num- --print F3 --select F3                  
      RatSlap v0.2.2-tags/0.2.2^0 (BUILT: 2018-07-11 11:06:16+0200)
      Copyright (C) 2016 Todd Harbour
      Linux configuration tool for Logitech mice (currently only G300/G300S)
      https://gitlab.com/krayon/ratslap/
      Found Logitech G300s (046d:c246) @ 0x5568a0d53ce0
      Detaching kernel driver...
      Modifying Mode: F3
          Setting button 7: LeftCtrl+Num+
      20180712T132246+0200 [E]           main.c:01101:set_mode_button ERROR: Invalid modifier (Num) specified: LeftCtrl+Num+
          Setting button 6: LeftCtrl+Num-
      Saving Mode: F3
      Printing Mode: F3
        Colour:              cyan
        Report Rate:          500
        DPI #1:               500
        DPI #2:        (DEF) 1000
        DPI #3:              1500
        DPI #4:              2500
        DPI Shift:           NOT SET
        Left Click (But1):   Button1
        Right Click (But2):  Button2
        Middle Click (But3): Button3
        G4:                  Button6
        G5:                  Button7
        G6:                  LeftCtrl + Num-
        G7:                  Button9
        G8:                  LeftCtrl + Tab
        G9:                  LeftCtrl + LeftShift + Tab
      Mode Selection Specified: F3
      Selecting Mode: F3
      Attaching kernel driver...
119RatSlapUncategorisedBug ReportLowUnrecognised keys/buttons fail silentlyNew
0%
2018-08-06 Task Description

QB#118 shows that unrecognised parameters (such as “button5”) fail silently,
assigning 000000h instead of reporting an error.

118RatSlapUncategorisedBug ReportLowButton5 cannot be assigned to G5New
0%
2018-08-062 Task Description

From GitHub Issue #9 by adrfantini:

I have a very weird behaviour here. After having modified many buttons to
suit my needs, I have the following problem.

I cannot assign many software mouse Buttons to many hardware buttons.
Assigning keys seems to always work tho.

Say I am in this situation:
...
  sudo ratslap --p F3
  Left Click (But1):   Button1
  Right Click (But2):  Button2
  Middle Click (But3): Button3
  G4:                  
  G5:                  
  G6:                  
  G7:                  
  G8:                  ModeSwitch
  G9:                  DPICycle
...
Now let's try to modify it with:
  sudo ratslap --modify F3 --G4 Button4
Result:
  sudo ratslap --p F3
  Left Click (But1):   Button1
  Right Click (But2):  Button2
  Middle Click (But3): Button3
  G4:                  
  G5:                  
  G6:                  
  G7:                  
  G8:                  ModeSwitch
  G9:                  DPICycle
Nothing! Let's try assigning keys instead:
  sudo ratslap --modify F3 --G4 LeftAlt+K
  Left Click (But1):   Button1
  Right Click (But2):  Button2
  Middle Click (But3): Button3
  G4:                  LeftAlt + K
  G5:                  
  G6:                  
  G7:                  
  G8:                  ModeSwitch
  G9:                  DPICycle
Works...

In short, I can seem to bind mouse Buttons anymore!

However, some, like sudo ratslap --modify F3 --G7 Button9 work, while others,
like sudo ratslap --modify F3 --G7 Button5 do not.
116RatSlapUncategorisedPlanned FeatureMediumModes should have simpler names such as A, B, CNew
0%
2018-08-06 Task Description

The mode names should be simpler than “F3”, “F4” and “F5”. They were only named
this way as that was the hex code for the mode, hardly user friendly.

115RatSlapUncategorisedPlanned FeatureLowAbility to save/load profilesNew
0%
2018-08-06 Task Description

Would be nice to be able to save and load profiles.

113RatSlapUncategorisedPlanned FeatureLowConfigure DPI #[1-4], DPI Default and DPI Shift valuesNew
0%
2016-11-09 Task Description

The Logitech G300s allows for 4 different DPI preset values that can be cycled
between using the assignments DPIDown, DPIUp and DPICycle.

Additionally, one of the 4 can be assigned as the DEFAULT DPI.

Lastly, a DPI Shift value can be assigned that can be temporarily switched
to be holding down the DPIShift assignment.

We need the ability to set these.

112RatSlapUncategorisedPlanned FeatureLowDistribution package should contain archNew
0%
2018-08-06 Task Description

The built dist package is named “ratslap-0.2.0.tar.gz” regardless of architecture.

110RatSlapUncategorisedBug ReportLowDocument basic usageAssigned
70%
2016-11-081 Task Description

From https://github.com/krayon/ratslap/issues/2 :

https://github.com/jpotier wrote:

  I may be tired, but I don't get how to set say key 1 to my button G4.
  Actually, apart from calling
      ./ratslap -p f3-5
  I don't understand how you actually set a modified mode. Should I edit the
  source code and recompile?

https://github.com/thomasluquet wrote:

  Same thing, for me, the documentation it is not really clear for me...
  BTW, i try to make a draw of the mouse and the buttons, is it ok ? (i can
  send you the .odg if you want)
107RatSlapUncategorisedPlanned FeatureHighReset to defaults/factory reset optionAssigned
0%
2018-07-102 Task Description

At present, the original configuration is lost once you modify the modes of the
mouse. An option to return the mouse to it’s factory defaults would be
advantageous.

Showing tasks 51 - 72 of 72 Page 2 of 2 - 1 - 2

Available keyboard shortcuts

Tasklist

Task Details

Task Editing