All Projects

Welcome to the Quadronyx Bug Tracker.

You can select a project from the “All Projects” drop down combo box in the top right corner. Displayed below are the tasks for ALL Quadronyx projects.

IDProjectCategoryTask TypeSeveritySummaryStatusProgress  descLast Edited
58QELServServerPlanned FeatureLowAdd lastseen abilityNew
0%
2010-01-22 Task Description

Add the ability to see when the last time a player was on. This would be a useful feature for players I would think.

62QELServServerBug ReportLowAnimations as a result of movement clicks during pendin...Assigned
0%
2010-01-26 Task Description

If whilst in pending combat state (i.e. you just clicked to attack a player/creature from a few steps away and start moving towards them, but combat hasn’t actually started yet) you click to move elsewhere, just after the combat animations start you then do a ‘step or two’ of the move animation in the direction you clicked, then flick back to combat animations fighting your opponent.

It looks weird and can mess up the rotation of the combat participants.

63QELServServerPlanned FeatureLowChannels ACLNew
0%
2010-01-28 Task Description

Channels should have support for simple ACL. They can have a “list” that will function as either a blacklist OR a whitelist.

  • First person to join get’s “op” status.
  • The channel has a BLANK list, defined as a BLACKLIST.
  • op can at any time add a name to the BLACKLIST. By doing so, that person cannot join the channel.
  • If the list is empty, op can add a name as a WHITELIST entry, thereby making the list a WHITELIST. From that moment on, ONLY whitelists are allowed to join and anyone (other than op) that is currently in the channel will be removed.
  • List can only be changed from WHITE to BLACK when it’s empty.
  • op can at any point change someone else to op. They swap effective positions so if the new op was on the WHITELIST then the old op is added and the new op removed (op doesn’t need to be WHITE).

Undecided behaviour:

In the event that the op leaves, one of these should happen:

  • the (WHITE/BLACK)LIST is cleared.
  • if WHITELIST, the first person in WHITELIST becomes op, otherwise list is cleared.
64QELServServerBug ReportLowVisible no cooldown on potion after moving it in eqUnconfirmed
0%
2010-02-03 Task Description

When you move in eq potion with cooldown visiblity of cooldown dissapear, but it still has cooldown.

1QELServUncategorisedPlanned FeatureVery LowMake QELServ BESTEST EVER!111New
0%
2009-09-203 Task Description

QELServ needs to be the BEST ... just BEST ... ever!

99OGGBotUncategorisedBug ReportLowtell/ask doesn't ignore illegal nick charsNew
0%
2013-06-01 Task Description

Currently, when the user issues a tell/ask command, the bot doesn’t parse out any punctuation IMMEDIATELY following the nick. This should be done for characters that are illegal for IRC nicks ( TODO: verify this list ).

100OGGBotUncategorisedPlanned FeatureVery LowDo an HPR episode on OGGBotAssigned
0%
2013-06-01 Task Description

Summary says it all :)

107RatSlapUncategorisedPlanned FeatureHighReset to defaults/factory reset optionAssigned
0%
2018-07-102 Task Description

At present, the original configuration is lost once you modify the modes of the
mouse. An option to return the mouse to it’s factory defaults would be
advantageous.

112RatSlapUncategorisedPlanned FeatureLowDistribution package should contain archNew
0%
2018-08-06 Task Description

The built dist package is named “ratslap-0.2.0.tar.gz” regardless of architecture.

113RatSlapUncategorisedPlanned FeatureLowConfigure DPI #[1-4], DPI Default and DPI Shift valuesNew
0%
2016-11-09 Task Description

The Logitech G300s allows for 4 different DPI preset values that can be cycled
between using the assignments DPIDown, DPIUp and DPICycle.

Additionally, one of the 4 can be assigned as the DEFAULT DPI.

Lastly, a DPI Shift value can be assigned that can be temporarily switched
to be holding down the DPIShift assignment.

We need the ability to set these.

115RatSlapUncategorisedPlanned FeatureLowAbility to save/load profilesNew
0%
2018-08-06 Task Description

Would be nice to be able to save and load profiles.

116RatSlapUncategorisedPlanned FeatureMediumModes should have simpler names such as A, B, CNew
0%
2018-08-06 Task Description

The mode names should be simpler than “F3”, “F4” and “F5”. They were only named
this way as that was the hex code for the mode, hardly user friendly.

118RatSlapUncategorisedBug ReportLowButton5 cannot be assigned to G5New
0%
2018-08-062 Task Description

From GitHub Issue #9 by adrfantini:

I have a very weird behaviour here. After having modified many buttons to
suit my needs, I have the following problem.

I cannot assign many software mouse Buttons to many hardware buttons.
Assigning keys seems to always work tho.

Say I am in this situation:
...
  sudo ratslap --p F3
  Left Click (But1):   Button1
  Right Click (But2):  Button2
  Middle Click (But3): Button3
  G4:                  
  G5:                  
  G6:                  
  G7:                  
  G8:                  ModeSwitch
  G9:                  DPICycle
...
Now let's try to modify it with:
  sudo ratslap --modify F3 --G4 Button4
Result:
  sudo ratslap --p F3
  Left Click (But1):   Button1
  Right Click (But2):  Button2
  Middle Click (But3): Button3
  G4:                  
  G5:                  
  G6:                  
  G7:                  
  G8:                  ModeSwitch
  G9:                  DPICycle
Nothing! Let's try assigning keys instead:
  sudo ratslap --modify F3 --G4 LeftAlt+K
  Left Click (But1):   Button1
  Right Click (But2):  Button2
  Middle Click (But3): Button3
  G4:                  LeftAlt + K
  G5:                  
  G6:                  
  G7:                  
  G8:                  ModeSwitch
  G9:                  DPICycle
Works...

In short, I can seem to bind mouse Buttons anymore!

However, some, like sudo ratslap --modify F3 --G7 Button9 work, while others,
like sudo ratslap --modify F3 --G7 Button5 do not.
119RatSlapUncategorisedBug ReportLowUnrecognised keys/buttons fail silentlyNew
0%
2018-08-06 Task Description

QB#118 shows that unrecognised parameters (such as “button5”) fail silently,
assigning 000000h instead of reporting an error.

125RatSlapUncategorisedBug ReportMediumError assigning Num+New
0%
2018-08-06 Task Description

From GitHub Issue #16 by vdomos :

  Hi,
  
  I have this error when assign a button to LeftCtrl+Num+ (zoom+ in FIrefox),
  LeftCtrl+Num- is ok.
  
      $ ./ratslap --modify F3 --G7 LeftCtrl+Num+ --G6 LeftCtrl+Num- --print F3 --select F3                  
      RatSlap v0.2.2-tags/0.2.2^0 (BUILT: 2018-07-11 11:06:16+0200)
      Copyright (C) 2016 Todd Harbour
      Linux configuration tool for Logitech mice (currently only G300/G300S)
      https://gitlab.com/krayon/ratslap/
      Found Logitech G300s (046d:c246) @ 0x5568a0d53ce0
      Detaching kernel driver...
      Modifying Mode: F3
          Setting button 7: LeftCtrl+Num+
      20180712T132246+0200 [E]           main.c:01101:set_mode_button ERROR: Invalid modifier (Num) specified: LeftCtrl+Num+
          Setting button 6: LeftCtrl+Num-
      Saving Mode: F3
      Printing Mode: F3
        Colour:              cyan
        Report Rate:          500
        DPI #1:               500
        DPI #2:        (DEF) 1000
        DPI #3:              1500
        DPI #4:              2500
        DPI Shift:           NOT SET
        Left Click (But1):   Button1
        Right Click (But2):  Button2
        Middle Click (But3): Button3
        G4:                  Button6
        G5:                  Button7
        G6:                  LeftCtrl + Num-
        G7:                  Button9
        G8:                  LeftCtrl + Tab
        G9:                  LeftCtrl + LeftShift + Tab
      Mode Selection Specified: F3
      Selecting Mode: F3
      Attaching kernel driver...
74QELBotWebAdminBug ReportLowWebAdmin to support discount configurationNew
0%
2010-11-15 Task Description

Trac Ticket #39 - Originally reported by: Krayon

The WebAdmin interface should support configuring discounts for players and guilds.
75QELBotWebAdminPlanned FeatureLowWebAdmin to support configuring responsesNew
0%
2010-11-15 Task Description

Trac Ticket #40 - Originally reported by: Krayon

WebAdmin should support configuring of responses.
77QELBotWebAdminPlanned FeatureLowWebAdmin to support viewing MessagesNew
0%
2010-11-15 Task Description

Trac Ticket #43 - Originally reported by: Krayon

The WebAdmin interface could include the ability to view messages as stored in the Messages table. This contains a history of messages sent to/from players using the bot’s “msg” command ( and maybe messages sent via the messaging system developed in #12 (FS#66) too ).
78QELBotWebAdminPlanned FeatureLowImprove WebAdmin field data validationNew
0%
2010-11-15 Task Description

Trac Ticket #49 - Originally reported by: Krayon

WebAdmin fields should perform (better) data validation, such as alpha/alphanumeric/numeric etc.
80QELBotWebAdminFeature RequestLowMake bot able to determine if item is stackableNew
0%
2010-11-15 Task Description

Trac Ticket #58 - Originally reported by: Korrode

Right now there is a “Stackable” entry for each item in the DB. This has to be set manually atm. If not set correctly it can make the allocated slots info output from the “status” command look confusing. (i.e. more than 36 slots allocated. 36 is maximum in EL).

Please make the bot determine if an item is stackable and set it as such.

Until that is done, if you can be bothered, remove “Stackable” column from WBI and allocated slot info from “status” command output.
86QELBotWebAdminPlanned FeatureLowWebAdmin to keep access logsNew
0%
2010-11-15 Task Description

Trac Ticket #75 - Originally reported by: Krayon

The WebAdmin should keep access logs with login/logout etc and times they occur. Perhaps even what modifications took place.
96QELBotWebAdminFeature RequestLowAdd force kill to WebAdminNew
0%
2010-12-15 Task Description

In light of FS#95, it would be good to have the ability to forcibly kill the bot no matter what state it’s in. It would also be useful if the bot had better monitoring and handling of itself ( FS#97 ).

Showing tasks 51 - 72 of 72 Page 2 of 2 - 1 - 2

Available keyboard shortcuts

Tasklist

Task Details

Task Editing