All Projects

Welcome to the Quadronyx Bug Tracker.

You can select a project from the “All Projects” drop down combo box in the top right corner. Displayed below are the tasks for ALL Quadronyx projects.

IDProjectCategoryTask TypeSeveritySummaryStatusProgress  ascLast Edited
60QELServS.AdminPlanned FeatureLowAdmin access player storageNew
0%
2010-01-22 Task Description

Admins need the ability to see (and modify) a player’s storage. This would allow them to remove items, add items etc. They would most likely have to use a bag as a go between but that would be acceptable.

61QELServS.AdminPlanned FeatureLowGlobal item purge/list/modifyNew
0%
2010-01-22 Task Description

The ability to purge, modify and list (who has and where) items would be advantageous.

It would allow for the easy removal or substitution of an item, on a global scale. Ideally it should handle things like subing a sword for a piece of fruit - which should remove sword, give fruit and stack with existing fruit if req’d.

To be able to list all players who are currently in possession of a given sword, and how many etc would be part of this presumably.

62QELServServerBug ReportLowAnimations as a result of movement clicks during pendin...Assigned
0%
2010-01-26 Task Description

If whilst in pending combat state (i.e. you just clicked to attack a player/creature from a few steps away and start moving towards them, but combat hasn’t actually started yet) you click to move elsewhere, just after the combat animations start you then do a ‘step or two’ of the move animation in the direction you clicked, then flick back to combat animations fighting your opponent.

It looks weird and can mess up the rotation of the combat participants.

63QELServServerPlanned FeatureLowChannels ACLNew
0%
2010-01-28 Task Description

Channels should have support for simple ACL. They can have a “list” that will function as either a blacklist OR a whitelist.

  • First person to join get’s “op” status.
  • The channel has a BLANK list, defined as a BLACKLIST.
  • op can at any time add a name to the BLACKLIST. By doing so, that person cannot join the channel.
  • If the list is empty, op can add a name as a WHITELIST entry, thereby making the list a WHITELIST. From that moment on, ONLY whitelists are allowed to join and anyone (other than op) that is currently in the channel will be removed.
  • List can only be changed from WHITE to BLACK when it’s empty.
  • op can at any point change someone else to op. They swap effective positions so if the new op was on the WHITELIST then the old op is added and the new op removed (op doesn’t need to be WHITE).

Undecided behaviour:

In the event that the op leaves, one of these should happen:

  • the (WHITE/BLACK)LIST is cleared.
  • if WHITELIST, the first person in WHITELIST becomes op, otherwise list is cleared.
64QELServServerBug ReportLowVisible no cooldown on potion after moving it in eqUnconfirmed
0%
2010-02-03 Task Description

When you move in eq potion with cooldown visiblity of cooldown dissapear, but it still has cooldown.

107RatSlapUncategorisedPlanned FeatureHighReset to defaults/factory reset optionAssigned
0%
2018-07-102 Task Description

At present, the original configuration is lost once you modify the modes of the
mouse. An option to return the mouse to it’s factory defaults would be
advantageous.

112RatSlapUncategorisedPlanned FeatureLowDistribution package should contain archNew
0%
2018-08-06 Task Description

The built dist package is named “ratslap-0.2.0.tar.gz” regardless of architecture.

113RatSlapUncategorisedPlanned FeatureLowConfigure DPI #[1-4], DPI Default and DPI Shift valuesNew
0%
2016-11-09 Task Description

The Logitech G300s allows for 4 different DPI preset values that can be cycled
between using the assignments DPIDown, DPIUp and DPICycle.

Additionally, one of the 4 can be assigned as the DEFAULT DPI.

Lastly, a DPI Shift value can be assigned that can be temporarily switched
to be holding down the DPIShift assignment.

We need the ability to set these.

115RatSlapUncategorisedPlanned FeatureLowAbility to save/load profilesNew
0%
2018-08-06 Task Description

Would be nice to be able to save and load profiles.

116RatSlapUncategorisedPlanned FeatureMediumModes should have simpler names such as A, B, CNew
0%
2018-08-06 Task Description

The mode names should be simpler than “F3”, “F4” and “F5”. They were only named
this way as that was the hex code for the mode, hardly user friendly.

118RatSlapUncategorisedBug ReportLowButton5 cannot be assigned to G5New
0%
2018-08-062 Task Description

From GitHub Issue #9 by adrfantini:

I have a very weird behaviour here. After having modified many buttons to
suit my needs, I have the following problem.

I cannot assign many software mouse Buttons to many hardware buttons.
Assigning keys seems to always work tho.

Say I am in this situation:
...
  sudo ratslap --p F3
  Left Click (But1):   Button1
  Right Click (But2):  Button2
  Middle Click (But3): Button3
  G4:                  
  G5:                  
  G6:                  
  G7:                  
  G8:                  ModeSwitch
  G9:                  DPICycle
...
Now let's try to modify it with:
  sudo ratslap --modify F3 --G4 Button4
Result:
  sudo ratslap --p F3
  Left Click (But1):   Button1
  Right Click (But2):  Button2
  Middle Click (But3): Button3
  G4:                  
  G5:                  
  G6:                  
  G7:                  
  G8:                  ModeSwitch
  G9:                  DPICycle
Nothing! Let's try assigning keys instead:
  sudo ratslap --modify F3 --G4 LeftAlt+K
  Left Click (But1):   Button1
  Right Click (But2):  Button2
  Middle Click (But3): Button3
  G4:                  LeftAlt + K
  G5:                  
  G6:                  
  G7:                  
  G8:                  ModeSwitch
  G9:                  DPICycle
Works...

In short, I can seem to bind mouse Buttons anymore!

However, some, like sudo ratslap --modify F3 --G7 Button9 work, while others,
like sudo ratslap --modify F3 --G7 Button5 do not.
119RatSlapUncategorisedBug ReportLowUnrecognised keys/buttons fail silentlyNew
0%
2018-08-06 Task Description

QB#118 shows that unrecognised parameters (such as “button5”) fail silently,
assigning 000000h instead of reporting an error.

125RatSlapUncategorisedBug ReportMediumError assigning Num+New
0%
2018-08-06 Task Description

From GitHub Issue #16 by vdomos :

  Hi,
  
  I have this error when assign a button to LeftCtrl+Num+ (zoom+ in FIrefox),
  LeftCtrl+Num- is ok.
  
      $ ./ratslap --modify F3 --G7 LeftCtrl+Num+ --G6 LeftCtrl+Num- --print F3 --select F3                  
      RatSlap v0.2.2-tags/0.2.2^0 (BUILT: 2018-07-11 11:06:16+0200)
      Copyright (C) 2016 Todd Harbour
      Linux configuration tool for Logitech mice (currently only G300/G300S)
      https://gitlab.com/krayon/ratslap/
      Found Logitech G300s (046d:c246) @ 0x5568a0d53ce0
      Detaching kernel driver...
      Modifying Mode: F3
          Setting button 7: LeftCtrl+Num+
      20180712T132246+0200 [E]           main.c:01101:set_mode_button ERROR: Invalid modifier (Num) specified: LeftCtrl+Num+
          Setting button 6: LeftCtrl+Num-
      Saving Mode: F3
      Printing Mode: F3
        Colour:              cyan
        Report Rate:          500
        DPI #1:               500
        DPI #2:        (DEF) 1000
        DPI #3:              1500
        DPI #4:              2500
        DPI Shift:           NOT SET
        Left Click (But1):   Button1
        Right Click (But2):  Button2
        Middle Click (But3): Button3
        G4:                  Button6
        G5:                  Button7
        G6:                  LeftCtrl + Num-
        G7:                  Button9
        G8:                  LeftCtrl + Tab
        G9:                  LeftCtrl + LeftShift + Tab
      Mode Selection Specified: F3
      Selecting Mode: F3
      Attaching kernel driver...
19QELServServerBug ReportLowActors should have a limited sight rangeAssigned
40%
2010-01-09 Task Description

At the moment, all actors can see all other actors on the map they are on. Instead they should have a limited range of vision.

9QELServS.TradingPlanned FeatureLowTrading systemAssigned
60%
2010-02-021 Task Description

Implement a trading system allowing players, NPCs and Creatures to trade items (client has existing trading window).

98QELServClientBug ReportLowMaps don't display properlyAssigned
60%
2012-10-23 Task Description

Seems the client paths for 3D objects has changed to a flat directory vs the old tree style. Maps will need to be modified.

89QELBotWebAdminPlanned FeatureLowWebAdmin to have current inventory listAssigned
70%
2010-11-152 Task Description

Trac Ticket #84 - Originally reported by: Krayon

As listed in #77 item 3, a list of the bot’s current inventory would be useful. You could therefore see exactly what it has on it. Potentially, the items list could have a column for currently holding and have a toggle for “only show items currently in inv”.
32QELServS.CombatPlanned FeatureMediumSand Bomb and resulting opponent behaviourAssigned
70%
2010-01-24 Task Description

Change “Getaway thing” to “Sand bomb” and make it so when you flee off opponents they can’t move/attack for 2 seconds, and when you use the “Sand bomb” they can’t move/attack for 5 seconds.

Sand bomb can have 60 sec cooldown (to start with, it may come down a little)

110RatSlapUncategorisedBug ReportLowDocument basic usageAssigned
70%
2016-11-081 Task Description

From https://github.com/krayon/ratslap/issues/2 :

https://github.com/jpotier wrote:

  I may be tired, but I don't get how to set say key 1 to my button G4.
  Actually, apart from calling
      ./ratslap -p f3-5
  I don't understand how you actually set a modified mode. Should I edit the
  source code and recompile?

https://github.com/thomasluquet wrote:

  Same thing, for me, the documentation it is not really clear for me...
  BTW, i try to make a draw of the mouse and the buttons, is it ok ? (i can
  send you the .odg if you want)
69QELBotB.TradingBug ReportLowBot giving wrong responses when finalizing a tradeRequires testing
90%
2010-11-154 Task Description

Trac Ticket #24 - Originally reported by: Korrode

When buying something from the Bot, after the trade is done it gives the wrong responce. Instead of saying “Thank you” it says “Sorry We couldnt come to an agreement.
71QELBotB.DatabaseBug ReportLowTransaction recording errorsRequires testing
90%
2010-11-153 Task Description

Trac Ticket #29 - Originally reported by: SleepyDragon

Ok, I discovered by accident why she is not correctly recording all transactions in the db. When you trade with her if you don’t press the accept buttons in the right order so that she comes up with the message “It’s been a pleasure doing business with you” etc and instead comes up with the message “sorry we couldn’t reach an agreement”, even if the transaction has been completed it will not register in the db.
76QELBotWebAdminPlanned FeatureVery LowWebAdmin to support viewing TransactionsAssigned
90%
2010-11-156 Task Description

Trac Ticket #41 - Originally reported by: Krayon

WebAdmin should support the viewing of transaction history.
Showing tasks 51 - 72 of 72 Page 2 of 2 - 1 - 2

Available keyboard shortcuts

Tasklist

Task Details

Task Editing