All Projects

Welcome to the Quadronyx Bug Tracker.

You can select a project from the “All Projects” drop down combo box in the top right corner. Displayed below are the tasks for ALL Quadronyx projects.

IDProjectCategoryTask TypeSeverity  ascSummaryStatusProgressLast Edited
115RatSlapUncategorisedPlanned FeatureLowAbility to save/load profilesNew
0%
2018-08-06 Task Description

Would be nice to be able to save and load profiles.

118RatSlapUncategorisedBug ReportLowButton5 cannot be assigned to G5New
0%
2018-08-062 Task Description

From GitHub Issue #9 by adrfantini:

I have a very weird behaviour here. After having modified many buttons to
suit my needs, I have the following problem.

I cannot assign many software mouse Buttons to many hardware buttons.
Assigning keys seems to always work tho.

Say I am in this situation:
...
  sudo ratslap --p F3
  Left Click (But1):   Button1
  Right Click (But2):  Button2
  Middle Click (But3): Button3
  G4:                  
  G5:                  
  G6:                  
  G7:                  
  G8:                  ModeSwitch
  G9:                  DPICycle
...
Now let's try to modify it with:
  sudo ratslap --modify F3 --G4 Button4
Result:
  sudo ratslap --p F3
  Left Click (But1):   Button1
  Right Click (But2):  Button2
  Middle Click (But3): Button3
  G4:                  
  G5:                  
  G6:                  
  G7:                  
  G8:                  ModeSwitch
  G9:                  DPICycle
Nothing! Let's try assigning keys instead:
  sudo ratslap --modify F3 --G4 LeftAlt+K
  Left Click (But1):   Button1
  Right Click (But2):  Button2
  Middle Click (But3): Button3
  G4:                  LeftAlt + K
  G5:                  
  G6:                  
  G7:                  
  G8:                  ModeSwitch
  G9:                  DPICycle
Works...

In short, I can seem to bind mouse Buttons anymore!

However, some, like sudo ratslap --modify F3 --G7 Button9 work, while others,
like sudo ratslap --modify F3 --G7 Button5 do not.
119RatSlapUncategorisedBug ReportLowUnrecognised keys/buttons fail silentlyNew
0%
2018-08-06 Task Description

QB#118 shows that unrecognised parameters (such as “button5”) fail silently,
assigning 000000h instead of reporting an error.

74QELBotWebAdminBug ReportLowWebAdmin to support discount configurationNew
0%
2010-11-15 Task Description

Trac Ticket #39 - Originally reported by: Krayon

The WebAdmin interface should support configuring discounts for players and guilds.
75QELBotWebAdminPlanned FeatureLowWebAdmin to support configuring responsesNew
0%
2010-11-15 Task Description

Trac Ticket #40 - Originally reported by: Krayon

WebAdmin should support configuring of responses.
77QELBotWebAdminPlanned FeatureLowWebAdmin to support viewing MessagesNew
0%
2010-11-15 Task Description

Trac Ticket #43 - Originally reported by: Krayon

The WebAdmin interface could include the ability to view messages as stored in the Messages table. This contains a history of messages sent to/from players using the bot’s “msg” command ( and maybe messages sent via the messaging system developed in #12 (FS#66) too ).
78QELBotWebAdminPlanned FeatureLowImprove WebAdmin field data validationNew
0%
2010-11-15 Task Description

Trac Ticket #49 - Originally reported by: Krayon

WebAdmin fields should perform (better) data validation, such as alpha/alphanumeric/numeric etc.
80QELBotWebAdminFeature RequestLowMake bot able to determine if item is stackableNew
0%
2010-11-15 Task Description

Trac Ticket #58 - Originally reported by: Korrode

Right now there is a “Stackable” entry for each item in the DB. This has to be set manually atm. If not set correctly it can make the allocated slots info output from the “status” command look confusing. (i.e. more than 36 slots allocated. 36 is maximum in EL).

Please make the bot determine if an item is stackable and set it as such.

Until that is done, if you can be bothered, remove “Stackable” column from WBI and allocated slot info from “status” command output.
86QELBotWebAdminPlanned FeatureLowWebAdmin to keep access logsNew
0%
2010-11-15 Task Description

Trac Ticket #75 - Originally reported by: Krayon

The WebAdmin should keep access logs with login/logout etc and times they occur. Perhaps even what modifications took place.
89QELBotWebAdminPlanned FeatureLowWebAdmin to have current inventory listAssigned
70%
2010-11-152 Task Description

Trac Ticket #84 - Originally reported by: Krayon

As listed in #77 item 3, a list of the bot’s current inventory would be useful. You could therefore see exactly what it has on it. Potentially, the items list could have a column for currently holding and have a toggle for “only show items currently in inv”.
96QELBotWebAdminFeature RequestLowAdd force kill to WebAdminNew
0%
2010-12-15 Task Description

In light of FS#95, it would be good to have the ability to forcibly kill the bot no matter what state it’s in. It would also be useful if the bot had better monitoring and handling of itself ( FS#97 ).

51QELServS.AIBug ReportMediumCreature spawning intelligent placementNew
0%
2010-01-22 Task Description

Creature’s can currently spawn anywhere within their given rectangle. This includes levels that aren’t necessarily possible to get to or from (say for example, a table). This means the creatures are currently taking up a useless slot, limiting the number of creatures people can fight, and using up unnecessary thinks, trying to find a way out.

Placement should be more intelligent, perhaps opting for something within a few height levels of norm, or of the spawns center.

20QELServS.CombatBug ReportMediumTarget leaves PK causes server lagAssigned
0%
2010-01-091 Task Description

If you attack someone in a PK area, and whilst in the PENDING fight state they leave the PK area, server lag occurs as the server tries to initiate combat.

32QELServS.CombatPlanned FeatureMediumSand Bomb and resulting opponent behaviourAssigned
70%
2010-01-24 Task Description

Change “Getaway thing” to “Sand bomb” and make it so when you flee off opponents they can’t move/attack for 2 seconds, and when you use the “Sand bomb” they can’t move/attack for 5 seconds.

Sand bomb can have 60 sec cooldown (to start with, it may come down a little)

50QELServServerFeature RequestMediumAdd ability for equipment to become "degraded"New
0%
2010-01-22 Task Description

Equipment should support being degraded. At the moment we have break percentages but once these kick in the item is simply lost. We should support the item transitioning to another state, optionally allowing for a modification of it’s stats.

53QELServServerPlanned FeatureMediumStorageNew
0%
2010-01-22 Task Description

We need storage fully functioning. The design for categories isn’t decided as yet. User defined perhaps? The problem with custom is the tediousness of defining each item’s category (unless you have it manual category selection but that’d suck).

116RatSlapUncategorisedPlanned FeatureMediumModes should have simpler names such as A, B, CNew
0%
2018-08-06 Task Description

The mode names should be simpler than “F3”, “F4” and “F5”. They were only named
this way as that was the hex code for the mode, hardly user friendly.

125RatSlapUncategorisedBug ReportMediumError assigning Num+New
0%
2018-08-06 Task Description

From GitHub Issue #16 by vdomos :

  Hi,
  
  I have this error when assign a button to LeftCtrl+Num+ (zoom+ in FIrefox),
  LeftCtrl+Num- is ok.
  
      $ ./ratslap --modify F3 --G7 LeftCtrl+Num+ --G6 LeftCtrl+Num- --print F3 --select F3                  
      RatSlap v0.2.2-tags/0.2.2^0 (BUILT: 2018-07-11 11:06:16+0200)
      Copyright (C) 2016 Todd Harbour
      Linux configuration tool for Logitech mice (currently only G300/G300S)
      https://gitlab.com/krayon/ratslap/
      Found Logitech G300s (046d:c246) @ 0x5568a0d53ce0
      Detaching kernel driver...
      Modifying Mode: F3
          Setting button 7: LeftCtrl+Num+
      20180712T132246+0200 [E]           main.c:01101:set_mode_button ERROR: Invalid modifier (Num) specified: LeftCtrl+Num+
          Setting button 6: LeftCtrl+Num-
      Saving Mode: F3
      Printing Mode: F3
        Colour:              cyan
        Report Rate:          500
        DPI #1:               500
        DPI #2:        (DEF) 1000
        DPI #3:              1500
        DPI #4:              2500
        DPI Shift:           NOT SET
        Left Click (But1):   Button1
        Right Click (But2):  Button2
        Middle Click (But3): Button3
        G4:                  Button6
        G5:                  Button7
        G6:                  LeftCtrl + Num-
        G7:                  Button9
        G8:                  LeftCtrl + Tab
        G9:                  LeftCtrl + LeftShift + Tab
      Mode Selection Specified: F3
      Selecting Mode: F3
      Attaching kernel driver...
93QELBotBotBug ReportHighBot crash during "inv"Assigned
0%
2010-11-151 Task Description

First seen on 2010-11-14 23:28 EST (UTC - 5:00), from the error log:

File "/home/qelbot/adversary/bot.py", line 848, in process_pm
  price = get_selling_price(requestor, item_name)
File "/home/qelbot/adversary/bot.py", line 1773, in get_selling_price
  my_db.execute(sql,(v.guild, item))
File "/home/qelbot/adversary/database.py", line 44, in execute
  self.cursor.execute(sql, args)
File "/usr/lib/python2.6/site-packages/MySQLdb/cursors.py", line 173, in execute
  self.errorhandler(self, exc, value)
File "/usr/lib/python2.6/site-packages/MySQLdb/connections.py", line 36, in defaulterrorhandler
  raise errorclass, errorvalue
_mysql_exceptions.OperationalError: (1267, "Illegal mix of collations (latin1_swedish_ci,IMPLICIT)
and (utf8_general_ci,COERCIBLE) for operation '='")
54QELServS.AdminPlanned FeatureHighAdd support for banningNew
0%
2010-01-22 Task Description

As we get players, we will get trouble makers, that much is already clear. We need the ability to ban users for a configurable amount of time, as well as preset amounts. These SHOULDN’T effect the forum bans however a ban on the forum SHOULD be a ban in game also (I think).

Something like this might do:

#ban PLAYERNAME [[[Y:]D:]H:]M REASON

eg.

#ban testuser 1:4:6:3 Because you're a tool

This would ban ‘testuser’ for 1 year, 4 days, 6 hours and 3 minutes because he’s a tool. He would be informed of such when trying to login.

Other examples:

#ban testuser 5 Come back in 5 minutes when you've learned to behave
#ban testuser 7:0 You're gone for 1 week buddy!

Should we support banning per player or per forum account (given that 1 forum account can have multiple players)?

Should we have pre-sets like: #ban7 for 7 days, #banwarn for 1 hour, #banladen for life?

107RatSlapUncategorisedPlanned FeatureHighReset to defaults/factory reset optionAssigned
0%
2018-07-102 Task Description

At present, the original configuration is lost once you modify the modes of the
mouse. An option to return the mouse to it’s factory defaults would be
advantageous.

95QELBotB.DatabaseBug ReportCriticalCrash/Reconnect loop on empty InventoryAssigned
0%
2010-12-151 Task Description

When the bot has an empty inventory, it will continually loop. It’s particularly bad as you can’t stop it from the WebAdmin and it spams the server with reconnect after reconnect.

Showing tasks 51 - 72 of 72 Page 2 of 2 - 1 - 2

Available keyboard shortcuts

Tasklist

Task Details

Task Editing