|
4 | QELServ | S.Combat | Bug Report | Low | A successful flee during combat prep doesn't flee | New | |
2009-09-21 |
Task Description
( from: http://qelserv.quadronyx.org/forums/index.php?topic=15.msg318#msg318 )
If you attempt to flee during combat preparation and actually succeed, the battle still takes place.
|
|
7 | QELServ | S.AI | Bug Report | Low | Creature AI is almost worse than none | New | |
2010-01-22 |
Task Description
Creatures move in a very stupid way and inevitably end up stuck and/or blocking paths etc. Whilst paths will be fixed in maps by making them wider, creatures should probably not stop on any narrow area anyway and should, in general, “think” about where they’re going
|
|
8 | QELServ | Client | Bug Report | Low | Remove "stupid" client code | New | |
2009-09-24 |
Task Description
At some point the client should be “cleaned” of all the truly ridiculous RAW_TEXT scraping code and changed to support simple server messages. These will eventually interfere with “normal” functionality.
|
|
19 | QELServ | Server | Bug Report | Low | Actors should have a limited sight range | Assigned | |
2010-01-09 |
Task Description
At the moment, all actors can see all other actors on the map they are on. Instead they should have a limited range of vision.
|
|
20 | QELServ | S.Combat | Bug Report | Medium | Target leaves PK causes server lag | Assigned | |
2010-01-09 |
Task Description
If you attack someone in a PK area, and whilst in the PENDING fight state they leave the PK area, server lag occurs as the server tries to initiate combat.
|
|
25 | QELServ | Server | Bug Report | Low | Taking multiple non-stackable items from bag screws pla... | New | |
2009-10-30 |
Task Description
If a player takes multiple of a non-stackable item, in one go, from a bag where they are stacked, their carry capacity gets screwed. ATM this is only causing an issue with #airdrop but could potentially cause other issues if we choose to allow bags to be non-stack exempt.
|
|
27 | QELServ | Server | Bug Report | Low | Equipping a stackable item, equips ALL of that item | New | |
2010-01-18 |
Task Description
When equipping an item that is stackable (and you have more than one), it equips ALL of that item, not just one.
|
|
48 | QELServ | Server | Bug Report | Low | Bags should be stackable | Assigned | |
2010-01-20 |
Task Description
Despite the changes for FS#47 the CLIENT doesn’t sent the right number of items to pick up as it expects items in bags to be stacked.
Since stacking in the bag is reasonable, and because it’ll save a client modification at this stage, bags should be made to support stacking of non-stackable items.
|
|
51 | QELServ | S.AI | Bug Report | Medium | Creature spawning intelligent placement | New | |
2010-01-22 |
Task Description
Creature’s can currently spawn anywhere within their given rectangle. This includes levels that aren’t necessarily possible to get to or from (say for example, a table). This means the creatures are currently taking up a useless slot, limiting the number of creatures people can fight, and using up unnecessary thinks, trying to find a way out.
Placement should be more intelligent, perhaps opting for something within a few height levels of norm, or of the spawns center.
|
|
52 | QELServ | S.AI | Bug Report | Low | Finish NPC buying/selling support | New | |
2010-01-22 |
Task Description
NPCs buying and selling needs to work betterer (and completely).
|
|
62 | QELServ | Server | Bug Report | Low | Animations as a result of movement clicks during pendin... | Assigned | |
2010-01-26 |
Task Description
If whilst in pending combat state (i.e. you just clicked to attack a player/creature from a few steps away and start moving towards them, but combat hasn’t actually started yet) you click to move elsewhere, just after the combat animations start you then do a ‘step or two’ of the move animation in the direction you clicked, then flick back to combat animations fighting your opponent.
It looks weird and can mess up the rotation of the combat participants.
|
|
64 | QELServ | Server | Bug Report | Low | Visible no cooldown on potion after moving it in eq | Unconfirmed | |
2010-02-03 |
Task Description
When you move in eq potion with cooldown visiblity of cooldown dissapear, but it still has cooldown.
|
|
98 | QELServ | Client | Bug Report | Low | Maps don't display properly | Assigned | |
2012-10-23 |
Task Description
Seems the client paths for 3D objects has changed to a flat directory vs the old tree style. Maps will need to be modified.
|
|
107 | RatSlap | Uncategorised | Planned Feature | High | Reset to defaults/factory reset option | Assigned | |
2018-07-10 |
Task Description
At present, the original configuration is lost once you modify the modes of the mouse. An option to return the mouse to it’s factory defaults would be advantageous.
|
|
112 | RatSlap | Uncategorised | Planned Feature | Low | Distribution package should contain arch | New | |
2018-08-06 |
Task Description
The built dist package is named “ratslap-0.2.0.tar.gz” regardless of architecture.
|
|
113 | RatSlap | Uncategorised | Planned Feature | Low | Configure DPI #[1-4], DPI Default and DPI Shift values | New | |
2016-11-09 |
Task Description
The Logitech G300s allows for 4 different DPI preset values that can be cycled between using the assignments DPIDown, DPIUp and DPICycle.
Additionally, one of the 4 can be assigned as the DEFAULT DPI.
Lastly, a DPI Shift value can be assigned that can be temporarily switched to be holding down the DPIShift assignment.
We need the ability to set these.
|
|
115 | RatSlap | Uncategorised | Planned Feature | Low | Ability to save/load profiles | New | |
2018-08-06 |
Task Description
Would be nice to be able to save and load profiles.
|
|
116 | RatSlap | Uncategorised | Planned Feature | Medium | Modes should have simpler names such as A, B, C | New | |
2018-08-06 |
Task Description
The mode names should be simpler than “F3”, “F4” and “F5”. They were only named this way as that was the hex code for the mode, hardly user friendly.
|
|
110 | RatSlap | Uncategorised | Bug Report | Low | Document basic usage | Assigned | |
2016-11-08 |
Task Description
From https://github.com/krayon/ratslap/issues/2 :
https://github.com/jpotier wrote:
I may be tired, but I don't get how to set say key 1 to my button G4.
Actually, apart from calling
./ratslap -p f3-5
I don't understand how you actually set a modified mode. Should I edit the
source code and recompile?
https://github.com/thomasluquet wrote:
Same thing, for me, the documentation it is not really clear for me...
BTW, i try to make a draw of the mouse and the buttons, is it ok ? (i can
send you the .odg if you want)
|
|
118 | RatSlap | Uncategorised | Bug Report | Low | Button5 cannot be assigned to G5 | New | |
2018-08-06 |
Task Description
From GitHub Issue #9 by adrfantini:
I have a very weird behaviour here. After having modified many buttons to
suit my needs, I have the following problem.
I cannot assign many software mouse Buttons to many hardware buttons.
Assigning keys seems to always work tho.
Say I am in this situation:
...
sudo ratslap --p F3
Left Click (But1): Button1
Right Click (But2): Button2
Middle Click (But3): Button3
G4:
G5:
G6:
G7:
G8: ModeSwitch
G9: DPICycle
...
Now let's try to modify it with:
sudo ratslap --modify F3 --G4 Button4
Result:
sudo ratslap --p F3
Left Click (But1): Button1
Right Click (But2): Button2
Middle Click (But3): Button3
G4:
G5:
G6:
G7:
G8: ModeSwitch
G9: DPICycle
Nothing! Let's try assigning keys instead:
sudo ratslap --modify F3 --G4 LeftAlt+K
Left Click (But1): Button1
Right Click (But2): Button2
Middle Click (But3): Button3
G4: LeftAlt + K
G5:
G6:
G7:
G8: ModeSwitch
G9: DPICycle
Works...
In short, I can seem to bind mouse Buttons anymore!
However, some, like sudo ratslap --modify F3 --G7 Button9 work, while others,
like sudo ratslap --modify F3 --G7 Button5 do not.
|
|
119 | RatSlap | Uncategorised | Bug Report | Low | Unrecognised keys/buttons fail silently | New | |
2018-08-06 |
Task Description
QB#118 shows that unrecognised parameters (such as “button5”) fail silently, assigning 000000h instead of reporting an error.
|
|
125 | RatSlap | Uncategorised | Bug Report | Medium | Error assigning Num+ | New | |
2018-08-06 |
Task Description
From GitHub Issue #16 by vdomos :
Hi,
I have this error when assign a button to LeftCtrl+Num+ (zoom+ in FIrefox),
LeftCtrl+Num- is ok.
$ ./ratslap --modify F3 --G7 LeftCtrl+Num+ --G6 LeftCtrl+Num- --print F3 --select F3
RatSlap v0.2.2-tags/0.2.2^0 (BUILT: 2018-07-11 11:06:16+0200)
Copyright (C) 2016 Todd Harbour
Linux configuration tool for Logitech mice (currently only G300/G300S)
https://gitlab.com/krayon/ratslap/
Found Logitech G300s (046d:c246) @ 0x5568a0d53ce0
Detaching kernel driver...
Modifying Mode: F3
Setting button 7: LeftCtrl+Num+
20180712T132246+0200 [E] main.c:01101:set_mode_button ERROR: Invalid modifier (Num) specified: LeftCtrl+Num+
Setting button 6: LeftCtrl+Num-
Saving Mode: F3
Printing Mode: F3
Colour: cyan
Report Rate: 500
DPI #1: 500
DPI #2: (DEF) 1000
DPI #3: 1500
DPI #4: 2500
DPI Shift: NOT SET
Left Click (But1): Button1
Right Click (But2): Button2
Middle Click (But3): Button3
G4: Button6
G5: Button7
G6: LeftCtrl + Num-
G7: Button9
G8: LeftCtrl + Tab
G9: LeftCtrl + LeftShift + Tab
Mode Selection Specified: F3
Selecting Mode: F3
Attaching kernel driver...
|